Used Equipment Sprayers working in field

MT11

Minimum-Till Ripper

Back to All New Equipment

Inquire About This Product

Right front studio rendering of MT11 Drawn (1st thumbnail)

Right studio rendering of MT11 Drawn (2nd thumbnail)

Rear right studio rendering of MT11 Drawn (3rd thumbnail)

Rear studio rendering of MT11 Drawn (4th thumbnail)

Left rear studio rendering of MT11 Drawn (5th thumbnail)

Left studio rendering of MT11 Drawn (6th thumbnail)

Left front studio rendering of MT11 Drawn (7th thumbnail)

Front studio rendering of MT11 Drawn (8th thumbnail)

Top studio rendering of MT11 Drawn (9th thumbnail)

11 standards
Four stabilizer wheels
Drawn*
Extended wear standards deliver twice the life expectancy*

Features

Expand All Collapse All

Manage compaction faster

MT11 Drawn paired with 9RX 710 Tractor

MT Series Minimum Till Rippers are built to run at 4 – 7 miles per hour behind today’s high horsepower tractors.

Rip 25 more acres per day with the MT11 compared to the previous 9 standard model. MT Series Rippers break-up deep compaction at depths up to 16 in. while minimizing topsoil disturbance.

Extended wear components lead to higher productivity

MT Standards

Extended wear standards deliver double the life expectancy compared to previous 2100 ripper models. The MT series delivers a highly productive and easy to set minimal maintenance solution to breaking up soil compaction. Spend less time changing components and more time working your ground.

Show More Show Less

Specifications

Select Different Model

Specifications

John Deere

MT11

Minimum-Till Ripper

Export to Excel

1 2

Key Specs

Working width	8.4 m 27.5 ft
Transport width	4.9 m 16 ft
Operating depth	Maximum 40.6 cm 16 in.
Miles per hour	6.4-11.2 km/h 4-7 mph
Horsepower per standard	29.8-44.7 kW 40-60 hp
Spacing between standards	76.2 cm 30 in.

Tool configuration

Type	In-line ripper
Option 1
Option 2
Option 3
Option 4
Option 5
Option 6
Option 7
Option 8
Option 9
Option 10
Option 11
Option 12
Option 13
Option 14
Option 15
Option 16
Option 17
Option 18
Option 19
Option 20
Option 21
Option 22

Working width

Option 1
Option 2
Option 3
Option 4
Option 5
Option 6
Option 7
Option 8
Option 9
Option 10
Option 11
Option 12
Option 13
Option 14
Option 15
Option 16
Option 17
Option 18
Option 19
Option 20
Option 21
Option 22

Transport width

Option 1
Option 2
Option 3
Option 4
Option 5
Option 6
Option 7
Option 8
Option 9
Option 10
Option 11
Option 12
Option 13
Option 14
Option 15
Option 16
Option 17
Option 18
Option 19
Option 20
Option 21
Option 22

Operating depth

Maximum	40.6 cm 16 in.

Frame

Size	152x152x9.5 mm 6x6x0.35 in.
Maximum underframe clearance	89 cm 35 in.

Operating speed

Miles per hour	6.4-11.2 km/h 4-7 mph

Horsepower required

Horsepower per standard	29.8-44.7 kW 40-60 hp

Depth control

Option 1
Option 2	TruSet™ in-cab controls and single-point crank-adjust
Option 3

Hydraulic requirements

Option 1	Drawn: 1 SCV (lift) at 17,237 kPa 2500 psi
Option 2	1 SCV (fold) at 17,237 kPa 2,500 psi

Hitch

Options	Drawn
Three-point hitch requirements
Pull-type description	Category 5 Hitch

Standard options

Spacing between standards	76.2 cm 30 in.
Option 1	Trip force Shear-bolt: 3,265 kg 7,200 lb Standard type Straight with wear shin: 19 or 31.75 mm 0.75 or 1.25 in. Shear-bolt
Option 2	Trip force 1,451.5 kg 3,200 lb Trip height 30.5 cm 12 in. Standard type 19 mm 0.75 in. Cushion trip
Option 3
Option 4

Ground-engaging components

Options	Standard: 19 mm (0.75 in.) min-till point: 178 mm (7 in.) low-disturbance: 179 mm (7 in.), 254 mm (10 in.) ultra-low-disturbance: 63 mm (2.5 in.) Standard: 31.75 mm (1.25 in.) Regular: 57 mm (2.25 in.) Capped: 57 mm (2.25 in.) Double-capped: 57 mm (2.25 in.) LaserRip points: 70 mm (2.75 in.), 127 mm (5 in.), and 178 mm (7 in.)

Coulters

Description
Type	Spring cushion coulters
Pounds of force	Normal working load: 272.2 kg 600 lb Deflection of: 10.2 cm 4 in. Maximum trip load: 362.9 kg 800 lb Deflection of: 20.3 cm 8 in.
Blades	Straight or rippled: 559×4.5 mm 22×0.1777 in.

Closing wheel attachment

Description
Down force	113.4 kg 250 lb
Size	10.2×40.6 cm 4×16 in.
Spacing	19.05 to 35.6 cm 7.5 to 14 in.
Angle adjustments	1 to 15 degree (angle)

Stabilizer/gauge wheels

Type	Four Stabilizer wheels
Wheels	52.1×20.3 cm 20.5×8 in.
Tires	10 PR

Pull-type wheels

Description	VF320/70R15 Radial tire
Additional feature
Option 1
Option 2
Option 3
Option 4

Additional information

Date collected

Show More Show Less

Request a Quote for New Equipment